Upgrade from 8.6 to .8.7 fails

hispeed

Thank you for your script, this finally worked.

wget -O - https://raw.githubusercontent.com/thctlo/Kopano/master/get-kopano-community.sh | bash
apt install kopano-server-packages
apt dist-upgrade
kopano-dbadm usmp

How can I update Z-push the in the shell it’s telling me it’s up to date but when I look in the webapp I still see Z-Push:
2.4.3+0-0 ?
I want to use: Z-Push 2.4.5+0.0

thctlo

hai,

you should see 2.4.5 at this time of writing.

run : apt-cache policy z-push-kopano

should give you :
z-push-kopano:
Installed: 2.4.5+0-0
Candidate: 2.4.5+0-0
Version table:
2.4.5+0-0 500
500 http://repo.z-hub.io/z-push:/final/Debian_9.0 Packages

You need to remember this, which is in case of kopano updates most important.

after running apt-get update and you ready to upgrade, follow these steps.

apt-get update
apt-get upgrade

If you see the upgrade like this.

The following packages will be upgraded:
  kopano-webapp kopano-webapp-plugin-quickitems kopano-webapp-plugin-titlecounter
3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Then its ok, and you can upgrade, but if a new package is added, then you get the message packages are kept back.

Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
  kopano-backup kopano-client kopano-common kopano-contacts kopano-dagent kopano-gateway kopano-ical kopano-monitor kopano-search kopano-server kopano-server-packages kopano-spooler kopano-utils
  libkcserver0 libkcsoap0 libkcutil0 php7-mapi python-kopano python-mapi
The following packages will be upgraded:
  curl kopano-lang kopano-webapp kopano-webapp-plugin-quickitems libcurl3 libcurl3-gnutls libgd3 libkcarchiver0 libkcarchivercore0 libkcfreebusy0 libkcicalmapi0 libkcinetmapi0 libkcrosie0 libmapi1
  openssh-client openssh-server openssh-sftp-server php-pear
18 upgraded, 0 newly installed, 0 to remove and 19 not upgraded.
Need to get 6988 kB/8019 kB of archives.
After this operation, 159 kB of additional disk space will be used.
Do you want to continue? [Y/n]

This is what cause you problem, Hit yes at this point and 1/2 kopano is upgraded, and fixing that with dpkg -i is not fun in general and for that, you can use dist-upgrade, as in :
apt-get update
apt-get dist-upgrade

for the z-push packages install, asumming you run a apache weberser:
apt-get install z-push-kopano z-push-config-apache

Good luck.

hispeed

Hi it looks like a bug in the webapp.

https://framapic.org/cNpjUWra0crx/LQ7XNawUPPcZ.jpg
https://framapic.org/fA7LAYteeO1e/7C61htzKG7Em.jpg

Here is also a bug I can’t upload any pictures to this forum ^^.

marty

@hispeed said in Upgrade from 8.6 to .8.7 fails:

Hi it looks like a bug in the webapp.

https://framapic.org/cNpjUWra0crx/LQ7XNawUPPcZ.jpg
https://framapic.org/fA7LAYteeO1e/7C61htzKG7Em.jpg

Here is also a bug I can’t upload any pictures to this forum ^^.

Maybe a bug in the MDM plugin…

Execute this and you should get the same version as shown in your image:

container.getSettingsModel().get(‘zarafa/v1/plugins/mdm/zpush-server-version’)

We make a call here:
https://stash.kopano.io/projects/KWA/repos/mobile-device-management/browse/php/class.pluginmdmmodule.php#43

What version do you see when you go to: <server>/Microsoft-Server-ActiveSync

hispeed

Hi @marty

I recieve this when i go on to the active sync website:

Z-Push - Open Source ActiveSync
Version 2.4.5+0-0
GET not supported
This is the Z-Push location and can only be accessed by Microsoft ActiveSync-capable devices

How can I execute this?:

container.getSettingsModel().get(‘zarafa/v1/plugins/mdm/zpush-server-version’)

marty

@hispeed said in Upgrade from 8.6 to .8.7 fails:

How can I execute this?:

In the console of your browser

hispeed

Hi @marty

I’m sorry I don’t understand that how this should work.

I have tried it in Firefox and Chrome. This path: “zarafa/v1/plugins/mdm/zpush-server-version” doesn’t exist on my server. I have an ubuntu 18.04 and i never had zarafa installed (just Kopano 8.6), just to tell you it’s a fresh install from last year June.

Why is it a bug in the MDM plugin I also don’t understand because it’s in the webapp wrong and for Z-Push, but you know that probably better than me.

robing

@hispeed you can’t copy marty’s his command as the quotes are not correct

container.getSettingsModel().get('zarafa/v1/plugins/mdm/zpush-server-version')

hispeed

Hi @robing

This worked, unfortunately I recieve:

container.getSettingsModel().get('zarafa/v1/plugins/mdm/zpush-server-version')
"2.4.3+0-0"

can I update without any other issues?

hispeed

How buggy is that ^^… sorry I can’t write it in other words…

@thctlo I tried your script on my production server. It doesn’t work. I recieve this error. I don’t know what to do.

100 3936k  100 3936k    0     0  9791k      0 --:--:-- --:--:-- --:--:-- 9767k
mv: './kopano-archiver_8.7.80.587.10057ac52-0+100.1_amd64.deb' and 'amd64/kopano-archiver_8.7.80.587.10057ac52-0+100.1_amd64.deb' are the same file
Please wait, generating  amd64/Packages File
Please wait, running apt-get update

The installed Kopano CORE apt-list file: /etc/apt/sources.list.d/kopano-community.list

Checking for Z_PUSH Repo on Ubuntu.
The Kopano Z_PUSH repo was already setup.

The z-push info : https://documentation.kopano.io/kopanocore_administrator_manual/configure_kc_components.html#configure-z-push-activesync-for-mobile-devices
Before you configure/install also read : https://wiki.z-hub.io/display/ZP/Installation

Sorry, Your os and/or version not supported in this script.
Kopano core versions available on the repo now are :
kopano-server-packages:
  Installiert:           8.6.80.1248-0+176.1
  Installationskandidat: 8.6.80.1248-0+176.1
  Versionstabelle:
 *** 8.6.80.1248-0+176.1 100
        100 /var/lib/dpkg/status

thctlo

You are on Ubuntu i see.

This can be ignored.
mv: './kopano-archiver …..
Somewhere archiver is double packaged.

Sorry, Your os and/or version not supported in this script
Ah.thats, you enabled libreoffice online and that one is not supported yet for Ubuntu 18.04.
i’ll make that message better.

Can you show me the content of the files in /etc/apt/sources.list.d/

The file repo looks created.
run apt-get update again, you tried that?
Then apt-cache policy kopano-server-packages to check?

marty

@hispeed said in Upgrade from 8.6 to .8.7 fails:

Hi @marty

Why is it a bug in the MDM plugin I also don’t understand because it’s in the webapp wrong and for Z-Push, but you know that probably better than me.

Because the MDM plugin is showing this z-push server version in WebApp.

Is the mdm plugin installed or pointing to the same z-push server? (Check mdm config.php)

hispeed

hi @marty

nano /etc/kopano/webapp/config-mdm.php

<?php
define(‘PLUGIN_MDM_USER_DEFAULT_ENABLE_MDM’, true);
define(‘PLUGIN_MDM_SERVER’, ‘XXX.XXXXX.ch’);
define(‘PLUGIN_MDM_SERVER_SSL’, true);
?>

@thctlo

/etc/apt/sources.list.d# dir
kopano-com.list kopano-community.list kopano-z-push.list z-push.list

and I found the mistake: in z-push.list I had the repo already added. So I commented that out and your script worked fine. It’s not always Kopano, also my mistakes :(. Now I’m up to date with the production server.

WebApp:
3.5.3.2161+1200.1
Kopano Core:
8.7.80
Z-Push:
2.4.3+0-0 -> Probably a bug in the MDM Plugin.

Also the version in: Plugins are not correct. MDM is updated as well to the latest version and it’s showing Version: 0.1 but the file shows 2.1 and the backend for files: 0.1
I don’t know what is correct, but it works and it looks good :).

marty

@hispeed

The versions shown in the plugin tab are the version defined in the plugins manifest.xml, but we don’t do anything with it right now. Don’t worry about that. Package version is the important thing here.

As for the z-push version in webapp settings, added by the mdm plugin:

Again in the console can you change the setting to:

container.getSettingsModel().set('zarafa/v1/plugins/mdm/zpush-server-version', '')

Then logout + login

And check what the setting is after login with

container.getSettingsModel().get('zarafa/v1/plugins/mdm/zpush-server-version')

hispeed

When I do that I recieve:

container.getSettingsModel().set('zarafa/v1/plugins/mdm/zpush-server-version', '')
undefined

After logout - login:

container.getSettingsModel().get('zarafa/v1/plugins/mdm/zpush-server-version')
"2.4.3+0-0"