Unable to load php-mapi



  • i trying to install at ubuntu 18.04.3
    but i hang by installing the composer…

    PHP Warning:  PHP Startup: Unable to load dynamic library 'mapi.so' (tried: /usr/lib/php/20180731/mapi.so (/usr/lib/php/20180731/mapi.so: cannot open shared object file: No such file or directory), /usr/lib/php/20180731/mapi.so.so (/usr/lib/php/20180731/mapi.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0
    All settings correct for using Composer
    Downloading...
    
    Composer (version 1.9.0) successfully installed to: /usr/share/kdav/composer.phar
    Use it: php composer.phar
    

    i found a mapi.so and copy to the 20180731 folder but not wotking.

    apt install php7-mapi
    

    say it installed allready and

    apt install php-mapi
    

    can’t installed cause of dkpg error:

    Paketlisten werden gelesen... Fertig
    Abhängigkeitsbaum wird aufgebaut.       
    Statusinformationen werden eingelesen.... Fertig
    Die folgenden zusätzlichen Pakete werden installiert:
      kopano-libs libgsoap-2.8.60 libvmime1
    Die folgenden NEUEN Pakete werden installiert:
      kopano-libs libgsoap-2.8.60 libvmime1 php-mapi
    0 aktualisiert, 4 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
    Es müssen noch 0 B von 3.320 kB an Archiven heruntergeladen werden.
    Nach dieser Operation werden 18,2 MB Plattenplatz zusätzlich benutzt.
    Möchten Sie fortfahren? [J/n] j
    Vormals nicht ausgewähltes Paket libgsoap-2.8.60:amd64 wird gewählt.
    (Lese Datenbank ... 147248 Dateien und Verzeichnisse sind derzeit installiert.)
    Vorbereitung zum Entpacken von .../libgsoap-2.8.60_2.8.60-2build1_amd64.deb ...
    Entpacken von libgsoap-2.8.60:amd64 (2.8.60-2build1) ...
    Vormals nicht ausgewähltes Paket libvmime1:amd64 wird gewählt.
    Vorbereitung zum Entpacken von .../libvmime1_0.9.2-5build2_amd64.deb ...
    Entpacken von libvmime1:amd64 (0.9.2-5build2) ...
    Vorbereitung zum Entpacken von .../kopano-libs_8.5.5-0ubuntu1_amd64.deb ...
    Entpacken von kopano-libs:amd64 (8.5.5-0ubuntu1) ...
    dpkg: Fehler beim Bearbeiten des Archivs /var/cache/apt/archives/kopano-libs_8.5.5-0ubuntu1_amd64.deb (--unpack):
     Versuch, »/usr/lib/mapi.d/kopano.inf« zu überschreiben, welches auch in Paket kopano-client 8.7.82.92.2b8011eaf-0+344.3 ist
    dpkg-deb: Fehler: einfügen subprocess was killed by signal (Broken pipe)
    Vorbereitung zum Entpacken von .../php-mapi_8.5.5-0ubuntu1_amd64.deb ...
    Entpacken von php-mapi (8.5.5-0ubuntu1) ...
    dpkg: Fehler beim Bearbeiten des Archivs /var/cache/apt/archives/php-mapi_8.5.5-0ubuntu1_amd64.deb (--unpack):
     Versuch, »/usr/lib/php/20170718/mapi.so« zu überschreiben, welches auch in Paket php7-mapi 8.7.82.92.2b8011eaf-0+344.3 ist
    dpkg-deb: Fehler: einfügen subprocess was killed by signal (Broken pipe)
    Fehler traten auf beim Bearbeiten von:
     /var/cache/apt/archives/kopano-libs_8.5.5-0ubuntu1_amd64.deb
     /var/cache/apt/archives/php-mapi_8.5.5-0ubuntu1_amd64.deb
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    

  • Kopano

    Hi noise,

    it looks like you have kopano packages mixup on your system. Please list all the installed kopano packages and their versions and also which repository you are using for kopano packages.

    Please also list which php version is installed on your system.

    Does kopano run on the same server as kdav? Is there also Z-Push or webapp installed on the same server?

    Manfred



  • @Manfred
    Hi Manfred
    this can be possible with mix packages…
    i do a:

    apt list --installed kopano*
    Auflistung... Fertig
    kopano-backup/unbekannt,now 8.7.82.88.29b8f3c42-0+336.1 amd64  [installiert]
    kopano-client/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-common/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [installiert]
    kopano-contacts/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-core/bionic,now 8.5.5-0ubuntu1 all  [installiert]
    kopano-dagent/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-gateway/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-ical/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-lang/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 all  [installiert]
    kopano-migration-imap/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [installiert]
    kopano-migration-pst/unbekannt,now 8.7.82.88.29b8f3c42-0+336.1 amd64  [installiert]
    kopano-monitor/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-python-utils/unbekannt,now 8.7.82.88.29b8f3c42-0+336.1 amd64  [installiert]
    kopano-python3-extras/unbekannt,now 0.1.2+0-0+53.1 amd64  [installiert]
    kopano-search/unbekannt,now 8.7.82.88.29b8f3c42-0+336.1 amd64  [installiert]
    kopano-server/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [installiert]
    kopano-spamd/unbekannt,now 8.7.82.88.29b8f3c42-0+336.1 amd64  [installiert]
    kopano-spooler/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [Installiert,automatisch]
    kopano-utils/unbekannt,now 8.7.82.92.2b8011eaf-0+344.3 amd64  [installiert]
    kopano-webapp/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-desktopnotifications/unbekannt,now 2.0.3.23+30.1 all  [installiert]
    kopano-webapp-plugin-filepreviewer/unbekannt,now 2.2.0.26+16.1 all  [installiert]
    kopano-webapp-plugin-files/unbekannt,now 2.1.6.334+227.1 all  [installiert]
    kopano-webapp-plugin-folderwidgets/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-gmaps/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-mdm/unbekannt,now 2.1.2.118+39.1 all  [installiert]
    kopano-webapp-plugin-pimfolder/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-quickitems/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-spell/unbekannt,now 2.0.0.19+36.1 all  [installiert]
    kopano-webapp-plugin-spell-de-at/unbekannt,now 2.0.0.4+20.3 all  [installiert]
    kopano-webapp-plugin-spell-de-ch/unbekannt,now 2.0.0.5+19.3 all  [installiert]
    kopano-webapp-plugin-spell-de-de/unbekannt,now 2.0.0.3+20.3 all  [installiert]
    kopano-webapp-plugin-spell-en/unbekannt,now 2.0.0.1+20.2 all  [installiert]
    kopano-webapp-plugin-spell-en-gb/unbekannt,now 2.0.0.1+19.2 all  [installiert]
    kopano-webapp-plugin-spell-es/unbekannt,now 2.0.0.1+19.2 all  [installiert]
    kopano-webapp-plugin-spell-fr/unbekannt,now 2.0.0.1+20.2 all  [installiert]
    kopano-webapp-plugin-spell-it/unbekannt,now 1.0.0+32.2 all  [installiert]
    kopano-webapp-plugin-spell-nl/unbekannt,now 2.0.0.1+21.2 all  [installiert]
    kopano-webapp-plugin-spell-pl-pl/unbekannt,now 2.0.0.0+25.2 all  [installiert]
    kopano-webapp-plugin-titlecounter/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    kopano-webapp-plugin-webappmanual/unbekannt,now 3.5.3.2155+1197.1 all  [installiert]
    
    dpkg -l | grep mapi
    ii  libkcicalmapi0                                                   8.7.82.92.2b8011eaf-0+344.3                              amd64        iCal interface for MAPI
    ii  libkcinetmapi0                                                   8.7.82.92.2b8011eaf-0+344.3                              amd64        Interface between internet e-mail and MAPI
    ii  libmapi1                                                         8.7.82.92.2b8011eaf-0+344.3                              amd64        Kopano's implementation of the Messaging API
    ii  php7-mapi                                                        8.7.82.92.2b8011eaf-0+344.3                              amd64        PHP bindings for MAPI
    ii  python3-mapi                                                     8.7.82.92.2b8011eaf-0+344.3                              amd64        Python 3 bindings for MAPI
    

    yes all are on the same server, kopano, z-push, webapp and running.
    php are Version 7.2.22-1 i try yesterday to update to 7.3 but nothing runs then i go back to 7.2

    about the repository i use:

    https://download.kopano.io/community
    

    and using this script to install & update:

    if [ ! -d /home/kopano/amd64 ]
    then
         mkdir -p /home/kopano/amd64
    fi
    cd /home/kopano/
    
    #Core
    wget https://download.kopano.io/community/core:/core-8.7.82.153.7edd827-Ubuntu_18.04-amd64.tar.gz
    tar xfvz core-8.7.82.153.7edd827-Ubuntu_18.04-amd64.tar.gz
    mv core-8.7.82.153.7edd827-Ubuntu_18.04-amd64/*.deb /home/kopano/amd64/
    
    #webapp
    wget https://download.kopano.io/community/webapp:/webapp-3.5.10.2410%2B1354.e06ea22-Ubuntu_18.04-all.tar.gz
    tar xfvz webapp-3.5.10.2410+1354.e06ea22-Ubuntu_18.04-all.tar.gz
    mv webapp-3.5.10.2410+1354.e06ea22-Ubuntu_18.04-all/*.deb /home/kopano/amd64/
    
    #mdm
    wget https://download.kopano.io/community/mdm:/mdm-2.1.2.118%2B39.1fd0409-Ubuntu_18.04-all.tar.gz
    tar xfvz mdm-2.1.2.118+39.1fd0409-Ubuntu_18.04-all.tar.gz
    mv mdm-2.1.2.118+39.1fd0409-Ubuntu_18.04-all/*.deb /home/kopano/amd64/
    
    #kopano-files
    wget https://download.kopano.io/community/files:/files-2.1.6.334%2B227-Ubuntu_18.04-all.tar.gz
    tar xfvz files-2.1.6.334+227-Ubuntu_18.04-all.tar.gz
    mv files-2.1.6.334+227-Ubuntu_18.04-all/*.deb /home/kopano/amd64/
    
    apt-ftparchive packages amd64/ > amd64/Packages
    if [ ! -f /etc/apt/sources.list.d/kopano-com.list ]
    then
        echo "deb [trusted=yes] file:/home/kopano amd64/" > /etc/apt/sources.list.d/kopano-com.list
    fi
    
    apt update
    

    p.s. i do not update to the newest version yet



  • @noise said in Request for Feedback: New CalDAV and CardDAV implementation for Kopano:

    kopano-libs libgsoap-2.8.60 libvmime1 php-mapi

    if you upgrade just run : apt-get dist-upgrade --autoremove --purge
    This will remove the “absolete package libgsoap-2.8.60” and it depends, allowing the new to function.

    This “should” be handled when installing/upgrading libgsoap.

    @noise Your really have a lot of conflicting versions installed.

    php are Version 7.2.22-1 i try yesterday to update to 7.3 but nothing runs then i go back to 7.2
    You can only use the php version supplied with Ubuntu the kopano builds are build against only that version of php.



  • remove you old packages…

    TEST :
    for x in `dpkg -l |grep kopano |grep 8.5.5 |cut -f3 -d" "` ; do echo $x ; done

    if you have a correct output, change echo $x to apt-get remove --purge --autoremove $x
    Start there.



  • @thctlo

    Hi thctlo
    Hmmm the output of this are:

    for x in `dpkg -l |grep kopano |grep 8.5.5 |cut -f3 -d" "` ; do echo $x ; done
    output:
    kopano-core
    
    for x in `dpkg -l |grep kopano |grep 8.5.5 |cut -f3 -d" "` ; do echo apt-get remove --purge --autoremove $x ; done
    output:
    apt-get remove --purge --autoremove kopano-core
    

    or i missunderstood something here :-)
    i will try the new update with:
    apt-get dist-upgrade --autoremove --purge

    because this says currently:

    apt-get dist-upgrade --autoremove --purge
    Paketlisten werden gelesen... Fertig
    Abhängigkeitsbaum wird aufgebaut.       
    Statusinformationen werden eingelesen.... Fertig
    Paketaktualisierung (Upgrade) wird berechnet... Fertig
    0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
    

    about php you say
    You can only use the php version supplied with Ubuntu the kopano builds are build against only that version of php.
    is version 7.2.22-1 the wrong ? i use the ondrej ppa for php

    edit: after update with my above script, all is wrong now
    counld no etsablish a connection to kopano server (webapp logon is presents) and services running… i have a snapshot so i can back but i looking now. if i find the problem…

    also i think i have a problem with mapi:

    php -i | fgrep mapi -A 4
    PHP Warning:  PHP Startup: Unable to load dynamic library 'mapi.so' (tried: /usr/lib/php/20180731/mapi.so (/usr/lib/php/20180731/mapi.so: cannot open shared object file: No such file or directory), /usr/lib/php/20180731/mapi.so.so (/usr/lib/php/20180731/mapi.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0
    

  • Kopano

    Since this has nothing to do with the functionality of kdav I have moved these posts into their own topic.



  • @fbartels, yes nothing todo with kdav correct.

    @noise said in Unable to load php-mapi:

    /usr/lib/php/

    Now run :
    cp /etc/kopano{,.backup}
    apt-get remove --purge --autoremove kopano-core

    Remember this : kopano-core is same as kopano-server-packages.
    the difference, kopano-core is from the distro packagers and kopano-server-packages is from kopano self.
    run ( just to make sure you have te minimal to run kopano : apt install kopano-server-packages

    ok now check if the kopano.ini is in the /etc/php folder.
    rgrep kopano /etc/php/*

    run : phpenmod kopano
    to make sure its enabled.

    systemctl stop apache2 && systemctl start apache2
    To fix that mapi problem you must stop and start apache, at least thats what i noticed.



  • @fbartels
    ok yes its better to move this post here 👍

    @thctlo
    strange are the imap connections (kopano-gateway) are still running, also email are incoming. only webapp & z-push are breaks.

    it looks like:
    https://forum.kopano.io/topic/2439/latest-kopano-build-breaks-z-push-functionality/24

    but a change in

    /etc/kopano/server.cfg
    #server_listen = *:236
    server_listen = [1.2.3.4]:236
    

    not helps to connect.

    and i notice also this logs:

    Thu Sep  5 22:16:02 2019: [  796] [error  ] HrLogon server "default:" user "SYSTEM": network error
    Thu Sep  5 22:16:02 2019: [  796] [error  ] Unable to open admin session: network error (80040115)
    Thu Sep  5 22:16:05 2019: [  796] [error  ] gsoap connect: ()
    Thu Sep  5 22:16:05 2019: [  796] [error  ] HrLogon server "default:" user "SYSTEM": network error
    
    Fri Sep  6 05:00:02 2019: [warning] SQL [00002711] info: Try to reconnect
    Fri Sep  6 05:00:02 2019: [warning] SQL [00002718] info: Try to reconnect
    Fri Sep  6 05:00:02 2019: [warning] SQL [00002719] info: Try to reconnect
    
    ==> /var/log/php7.2-fpm.log <==
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] ERROR: unable to read what child say: Bad file descriptor (9)
    [05-Sep-2019 22:13:51] NOTICE: exiting, bye-bye!
    [05-Sep-2019 22:16:09] NOTICE: fpm is running, pid 932
    [05-Sep-2019 22:16:10] NOTICE: ready to handle connections
    [05-Sep-2019 22:16:10] NOTICE: systemd monitor interval set to 10000ms
    

    i try now your workaround and give a report back.

    p.s. i use nginx not apache, but should not be so relevant.



  • works the same, stop/start nginx… you php needs to reload. but not reload stop/start, why i dont know restart does not work as far i can tell.



  • @thctlo

    i do the following…

    apt-get remove --purge --autoremove kopano-core
    
    output:
    Entfernen von kopano-core (8.5.5-0ubuntu1) ...
    Entfernen von kopano-dagent (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von kopano-gateway (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von kopano-ical (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von kopano-monitor (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von kopano-spooler (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von libkcarchivercore0 (8.7.82.92.2b8011eaf-0+344.3) ...
    Entfernen von libkcpyplug0 (8.7.82.92.2b8011eaf-0+344.3) ...
    
    apt install kopano-server-packages
    
    rgrep kopano /etc/php/*
    
    output:
    /etc/php/7.0/mods-available/kopano.ini:include_path="${include_path}:/usr/share/kopano/php"
    /etc/php/7.2/mods-available/kopano.ini:include_path="${include_path}:/usr/share/kopano/php"
    /etc/php/7.3/mods-available/kopano.ini:include_path="${include_path}:/usr/share/kopano/php"
    
    phpenmod kopano
    output: nothing
    
    systemctl stop nginx php7.2-fpm && systemctl start nginx php7.2-fpm
    

    Same as before all services running exept search, but i think this is another thing:

    kopano-search.service - Kopano Groupware Core Search Daemon
       Loaded: loaded (/lib/systemd/system/kopano-search.service; enabled; vendor preset: enabled)
       Active: failed (Result: exit-code) since Fri 2019-09-06 12:33:11 CEST; 17min ago
         Docs: man:kopano-search(8)
               man:kopano-search.cfg(5)
      Process: 822 ExecStart=/usr/sbin/kopano-search -F (code=exited, status=1/FAILURE)
     Main PID: 822 (code=exited, status=1/FAILURE)
    
    Sep 06 12:33:10 smtp kopano-search[822]:     from . import table as _table
    Sep 06 12:33:10 smtp kopano-search[822]:   File "/usr/lib/python3/dist-packages/kopano/table.py", line 25, in <module>
    Sep 06 12:33:10 smtp kopano-search[822]:     from . import property_ as _prop
    Sep 06 12:33:10 smtp kopano-search[822]:   File "/usr/lib/python3/dist-packages/kopano/property_.py", line 48, in <module>
    Sep 06 12:33:10 smtp kopano-search[822]:     from . import timezone as _timezone
    Sep 06 12:33:10 smtp kopano-search[822]:   File "/usr/lib/python3/dist-packages/kopano/timezone.py", line 24, in <module>
    Sep 06 12:33:10 smtp kopano-search[822]:     import tzlocal
    Sep 06 12:33:10 smtp kopano-search[822]: ModuleNotFoundError: No module named 'tzlocal'
    

    check mapi

    php -i | fgrep mapi -A 4
    PHP Warning:  PHP Startup: Unable to load dynamic library 'mapi.so' (tried: /usr/lib/php/20180731/mapi.so (/usr/lib/php/20180731/mapi.so: cannot open shared object file: No such file or directory), /usr/lib/php/20180731/mapi.so.so (/usr/lib/php/20180731/mapi.so.so: cannot open shared object file: No such file or directory)) in Unknown on line 0
    
    ls -la /usr/lib/php/20180731/mapi.so
    ls: cannot access '/usr/lib/php/20180731/mapi.so': No such file or directory
    

    mapi.so are not in the folder 20180731
    there is only a mapi.so in /usr/lib/php/20170718

    if i do simple copy from 20170718 to 20180731 the output are:

    php -i | fgrep mapi -A 4
    PHP Warning:  PHP Startup: mapi: Unable to initialize module
    Module compiled with module API=20170718
    PHP    compiled with module API=20180731
    These options need to match
     in Unknown on line 0
    

    not work because not match…

    this means i have the wrong php right ?
    i use the ondrej ppa, but wich repo do I have to take ?



  • Make sure you use the default php version of ubuntu (7.2) is set.

    check that with:
    update-alternatives --config php
    update-alternatives --config php-cgi
    update-alternatives --config php-fpm

    Any others check that with : ls -al /etc/alternatives/|grep php

    ModuleNotFoundError: No module named ‘tzlocal’
    apt install python3-tzlocal wil fix that.

    mapi.so in /usr/lib/php/20170718
    then there is most probely still a package related to that one.

    run : dpkg -S Path_to/That/Mapi.ile

    That will show from which package its coming. and htat is most probely : php-smbclient
    You need that is you use the file plugin and you want smb access.
    I have these:

     dpkg -S /usr/lib/php/20170718/smbclient.so
     php-smbclient: /usr/lib/php/20170718/smbclient.so
     dpkg -S /usr/lib/php/20180731/mapi.so
     php7-mapi: /usr/lib/php/20180731/mapi.so
    
    verify it :  dpkg -s php7-mapi
    

    And if its not installed install it again.
    and thanks i now also noticed on debian Buster that kopano-smime is still using php7.2, where debian buster is on 7.3. :-/



  • @thctlo

    Great this resolve the mapi and search problem many thanks 👍
    but still not be able to login at webapp and z-push also not working

    06/09/2019 14:04:20 [ 3037] [FATAL] [test@domain.com] Exception: (ServiceUnavailableException) - Error connecting to KC (login)
    06/09/2019 14:04:22 [ 3143] [WARN] [test@domain.com] /usr/share/z-push/backend/kopano/kopano.php:168 mapi_logon_zarafa(): Unable to setup service for provider (2)
    06/09/2019 14:04:22 [ 3143] [ERROR] [test@domain.com] KopanoBackend->Logon(): login failed with error code: 0xFFFFFFFF80040115
    
    06/09/2019 14:04:27 [ 3039] [WARN] [test@domain.com] /usr/share/z-push/backend/kopano/kopano.php:168 mapi_logon_zarafa(): Unable to setup service for provider (2)
    06/09/2019 14:04:27 [ 3039] [ERROR] [test@domain.com] KopanoBackend->Logon(): login failed with error code: 0xFFFFFFFF80040115
    06/09/2019 14:04:27 [ 3039] [ INFO] [test@domain.com] ServiceUnavailableException: Error connecting to KC (login) - code: 0 - file: /usr/share/z-push/backend/kopano/kopano.php:184
    06/09/2019 14:04:27 [ 3039] [ INFO] [test@domain.com] User-agent: 'Apple-iPhone9C3/1607.77'
    06/09/2019 14:04:27 [ 3039] [FATAL] [test@domain.com] Exception: (ServiceUnavailableException) - Error connecting to KC (login)
    06/09/2019 14:04:27 [ 3039] [ INFO] [test@domain.com] cmd='' memory='1.66 MiB/2.00 MiB' time='0.01s' devType='' devId='' getUser='test@domain.com' from='xxx.xxx.xxx.xxx' idle='0s' version='2.5.1+0-0' method='OPTIONS' httpcode='503'
    
    ==> /var/log/kopano/spooler.log <==
    Fri Sep  6 14:16:15 2019: [ 1062] [error  ] Unable to open admin session: network error (80040115)
    Fri Sep  6 14:16:18 2019: [ 1062] [error  ] gsoap connect: ()
    Fri Sep  6 14:16:18 2019: [ 1062] [error  ] HrLogon server "default:" user "SYSTEM": network error
    Fri Sep  6 14:16:18 2019: [ 1062] [error  ] Unable to open admin session: network error (80040115)
    Fri Sep  6 14:20:54 2019: [ 1062] [warning] Table reload requested, breaking server connection
    Fri Sep  6 14:20:54 2019: [ 1062] [warning] Server connection lost. Reconnecting in 3 seconds...
    Fri Sep  6 14:29:52 2019: [=======] Starting kopano-spooler version 8.7.82 (pid 5758 uid 0)
    Fri Sep  6 14:29:52 2019: [error  ] Use of Python (plugin_enabled=yes) forces process_model=fork
    Fri Sep  6 14:29:52 2019: [=======] Starting kopano-spooler version 8.7.82 (pid 5758 uid 999)
    Fri Sep  6 14:29:52 2019: [error  ] Use of Python (plugin_enabled=yes) forces process_model=fork
    
    
    ==> /var/log/php7.2-fpm.log <==
    [06-Sep-2019 14:16:23] NOTICE: fpm is running, pid 963
    [06-Sep-2019 14:16:24] NOTICE: ready to handle connections
    [06-Sep-2019 14:16:24] NOTICE: systemd monitor interval set to 10000ms
    [06-Sep-2019 14:21:02] NOTICE: Terminating ...
    [06-Sep-2019 14:21:02] ERROR: unable to read what child say: Bad file descriptor (9)
    [06-Sep-2019 14:21:02] ERROR: unable to read what child say: Bad file descriptor (9)
    [06-Sep-2019 14:21:02] NOTICE: exiting, bye-bye!
    [06-Sep-2019 14:21:03] NOTICE: fpm is running, pid 4360
    [06-Sep-2019 14:21:03] NOTICE: ready to handle connections
    [06-Sep-2019 14:21:03] NOTICE: systemd monitor interval set to 10000ms
    

    the connection lost since the update i do yesterday. Before that it runs. but this is now another problem…



  • Now i dont know much about nginx.
    but this looks very good. https://kb.kopano.io/display/WIKI/Nginx
    Follow that and review the setup.

    Your almost there. ;-)

    Side note.
    i presonaly disable all webapp z-push modules etc.
    I include these from the “available” folders in my apache setup.
    then i create an empty the file and put that one in the “enabled” folder.
    so my /etc/apache2/sites-enabled/webapp.conf is totaly empty.
    Why i do this? Its just there so webapp wont get enabled as “sites” config after an upgrade, because that sometimes happens.



  • @thctlo

    could somehow never really make friends with apache :-) and since I’ve dealt with the nginx I only use this.

    i think is not a nginx problem, webapp login page are showing, only no connection if you want to login. perhaps i go back to the last snapshot reconfigure mapi and search and trying the update again. is not a productive machine.

    could also almost bet that my umaluts problem, which was still not really solved) is also related with mapi relative php



  • Everyone there own cookie… i never tried nginx…

    but if you follow the steps i showed, you will find you problem.

    My first guesss…

    kopano.ini is not loaded for php-fpm.
    Sorry i can only show the apache examples, but for nginx its the same on debian/ubuntu… :-)

    ls -al
    total 28
    drwxr-xr-x 7 root root 4096 Jul 22 10:47 .
    drwxr-xr-x 3 root root 4096 Jul 22 10:47 ..
    drwxr-xr-x 3 root root 4096 Jul 22 10:48 apache2
    drwxr-xr-x 3 root root 4096 Jul 22 10:48 cgi
    drwxr-xr-x 3 root root 4096 Jul 22 10:48 cli
    drwxr-xr-x 4 root root 4096 Jul 22 10:48 fpm
    drwxr-xr-x 2 root root 4096 Aug 17 22:13 mods-available
    

    Verify that kopano.ini is loaded where its needed.

    /etc/php/7.3/apache2/conf.d/20-kopano.ini
    /etc/php/7.3/cli/conf.d/20-kopano.ini
    

    i my guest is that you need this.
    phpenmod -s ALL kopano

    You can change the ALL also per SAPI…
    like this :

    phpenmod -s cli kopano
    phpenmod -s nginx kopano
    phpenmod -s fpm kopano
    


  • @thctlo

    ok i take a look here.
    but look on php are kopano ini is loaded
    screenshot.png

    i not really shure, but phpenmod is only for apache



  • yeah… your not sure…
    I am… :-p

    phpenmod -s nginx kopano ;-) will work.



  • @thctlo
    ok great :-) i try… many thanks for your support 👍

    edit: you totally right

    root@smtp:~# phpenmod -s cli kopano
    WARNING: Module kopano ini file doesn't exist under /etc/php/7.1/mods-available
    
    root@smtp:~# phpenmod -s nginx kopano
    WARNING: Invalid SAPI (nginx) specified
    usage: phpquery [ -d ] [ -q ] -v version_name -s sapi_name [ -m module_name ] [ -M ] [ -S ] [ -V ]
    WARNING: Directory /etc/php/7.3/nginx/conf.d doesn't exist, not enabling the module
    WARNING: Invalid SAPI (nginx) specified
    usage: phpquery [ -d ] [ -q ] -v version_name -s sapi_name [ -m module_name ] [ -M ] [ -S ] [ -V ]
    WARNING: Directory /etc/php/7.2/nginx/conf.d doesn't exist, not enabling the module
    WARNING: Module kopano ini file doesn't exist under /etc/php/7.1/mods-available
    WARNING: Invalid SAPI (nginx) specified
    usage: phpquery [ -d ] [ -q ] -v version_name -s sapi_name [ -m module_name ] [ -M ] [ -S ] [ -V ]
    WARNING: Directory /etc/php/7.0/nginx/conf.d doesn't exist, not enabling the module
    
    root@smtp:~# phpenmod -s fpm kopano
    WARNING: Invalid SAPI (fpm) specified
    usage: phpquery [ -d ] [ -q ] -v version_name -s sapi_name [ -m module_name ] [ -M ] [ -S ] [ -V ]
    WARNING: Directory /etc/php/7.3/fpm/conf.d doesn't exist, not enabling the module
    WARNING: Module kopano ini file doesn't exist under /etc/php/7.1/mods-available
    WARNING: Invalid SAPI (fpm) specified
    usage: phpquery [ -d ] [ -q ] -v version_name -s sapi_name [ -m module_name ] [ -M ] [ -S ] [ -V ]
    WARNING: Directory /etc/php/7.0/fpm/conf.d doesn't exist, not enabling the module
    


  • Your welkom, and i suggest, use the ALL then your sure you dont miss one.
    If you run from php from CLI, then you need the kopano.ini also in php/cli …

    If everything works, you can remove one for one, and keep only you really need.

    Have a great weekend i hope i helped you.


Log in to reply