Navigation

    Kopano
    • Register
    • Login
    • Search
    • Categories
    • Get Official Kopano Support
    • Recent
    Statement regarding the closure of the Kopano community forum and the end of the community edition

    Spooler unable to connect to SMTP

    Kopano Groupware Core
    4
    12
    1935
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Miyamoto72
      Miyamoto72 last edited by Miyamoto72

      the runuser command you gave didn’t succeed - the telnet session is never established.
      Scanning the server from the LAN yields the following:

      PORT     STATE    SERVICE
22/tcp   open     ssh
25/tcp   filtered smtp
80/tcp   open     http
110/tcp  open     pop3
143/tcp  open     imap
443/tcp  open     https
465/tcp  open     smtps
587/tcp  open     submission
2003/tcp open     finger
8080/tcp open     http-proxy
9090/tcp open     zeus-admin

      Port 9090 is used by cockpit.

      netstat -tulpen | grep 25

      on the server shows this:

      tcp        3      0 0.0.0.0:587             0.0.0.0:*               LISTEN      0          155156     25893/master        
tcp        3      0 0.0.0.0:465             0.0.0.0:*               LISTEN      0          155162     25893/master        
tcp      101      0 0.0.0.0:25              0.0.0.0:*               LISTEN      0          155150     25893/master        
tcp6       0      0 :::587                  :::*                    LISTEN      0          155157     25893/master        
tcp6       0      0 :::465                  :::*                    LISTEN      0          155163     25893/master        
tcp6     101      0 :::25                   :::*                    LISTEN      0          155151     25893/master

      The PID is a child of ‘service postfix@- start’

      ● postfix@-.service - Postfix Mail Transport Agent (instance -)
   Loaded: loaded (/lib/systemd/system/postfix@.service; enabled-runtime; vendor preset: enabled)
   Active: active (running) since Tue 2019-12-10 21:59:52 CET; 5 days ago
     Docs: man:postfix(1)
    Tasks: 4 (limit: 4915)
   Memory: 17.4M
   CGroup: /system.slice/system-postfix.slice/postfix@-.service
           ├─ 3035 pickup -l -t unix -u -c
           ├─ 5095 proxymap -t unix -u
           ├─25893 /usr/lib/postfix/sbin/master -w
           └─25895 qmgr -l -t unix -u

      The log excerpt from ‘service postfix@- status’ reads:

      Dez 16 16:24:38 mail postfix/smtps/smtpd[5295]: fatal: open dictionary: expecting "type:name" form instead of "#"
Dez 16 16:24:38 mail postfix/submission/smtpd[5294]: fatal: open dictionary: expecting "type:name" form instead of "#"
Dez 16 16:24:39 mail postfix/master[25893]: warning: process /usr/lib/postfix/sbin/cleanup pid 5292 exit status 1
Dez 16 16:24:39 mail postfix/master[25893]: warning: /usr/lib/postfix/sbin/cleanup: bad command startup -- throttling
Dez 16 16:24:39 mail postfix/master[25893]: warning: process /usr/lib/postfix/sbin/smtpd pid 5293 exit status 1
Dez 16 16:24:39 mail postfix/master[25893]: warning: /usr/lib/postfix/sbin/smtpd: bad command startup -- throttling
Dez 16 16:24:39 mail postfix/master[25893]: warning: process /usr/lib/postfix/sbin/smtpd pid 5295 exit status 1
Dez 16 16:24:39 mail postfix/master[25893]: warning: /usr/lib/postfix/sbin/smtpd: bad command startup -- throttling
Dez 16 16:24:39 mail postfix/master[25893]: warning: process /usr/lib/postfix/sbin/smtpd pid 5294 exit status 1
Dez 16 16:24:39 mail postfix/master[25893]: warning: /usr/lib/postfix/sbin/smtpd: bad command startup -- throttling

      Any ideas?

      1 Reply Last reply Reply Quote 0
      • Miyamoto72
        Miyamoto72 last edited by

        Oh, and according to the output ‘iptables -L’ I think the firewall is not to blame:

        Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy DROP)
target     prot opt source               destination         
DOCKER-USER  all  --  anywhere             anywhere            
DOCKER-ISOLATION-STAGE-1  all  --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere             ctstate RELATED,ESTABLISHED
DOCKER     all  --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     all  --  anywhere             anywhere            

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination         

Chain DOCKER (1 references)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             172.17.0.2           tcp dpt:9980

Chain DOCKER-ISOLATION-STAGE-1 (1 references)
target     prot opt source               destination         
DOCKER-ISOLATION-STAGE-2  all  --  anywhere             anywhere            
RETURN     all  --  anywhere             anywhere            

Chain DOCKER-ISOLATION-STAGE-2 (1 references)
target     prot opt source               destination         
DROP       all  --  anywhere             anywhere            
RETURN     all  --  anywhere             anywhere            

Chain DOCKER-USER (1 references)
target     prot opt source               destination         
RETURN     all  --  anywhere             anywhere
        1 Reply Last reply Reply Quote 0
        • jengelh
          jengelh Banned @jengelh last edited by

          @Miyamoto72 said in Spooler unable to connect to SMTP:

          the runuser command you gave didn’t succeed - the telnet session is never established.
          Scanning the server from the LAN yields the following:

          PORT     STATE    SERVICE
22/tcp   open     ssh
25/tcp   filtered smtp
80/tcp   open     http
110/tcp  open     pop3
143/tcp  open     imap
443/tcp  open     https
465/tcp  open     smtps
587/tcp  open     submission
2003/tcp open     finger
8080/tcp open     http-proxy
9090/tcp open     zeus-admin

          So there is your answer. if neither telnet nor nmap can connect, how could kopano …

          1 Reply Last reply Reply Quote 0
          • Miyamoto72
            Miyamoto72 last edited by

            Yeah, right - but what’s the problem here, how can I solve it?

            1 Reply Last reply Reply Quote 0
            • A Former User
              A Former User last edited by

              Disable the firewall and test.

              Miyamoto72 1 Reply Last reply Reply Quote 0
              • thctlo
                thctlo last edited by thctlo

                @Miyamoto72 said in Spooler unable to connect to SMTP:

                fatal: open dictionary: expecting “type:name” form instead of “#”

                This looks like a config error, post the master.cf and main.cf
                This has nothing todo with kopano.

                Your postfix mappings are not correct.

                Dez 16 16:24:38 mail postfix/smtps/smtpd[5295]: fatal: open dictionary: expecting "type:name" form instead of "#"
Dez 16 16:24:38 mail postfix/submission/smtpd[5294]: fatal: open dictionary: expecting "type:name" form instead of "#"

                And this clearly shows it, due too these above errors postfix not starting fully.

                I suggest, compair your settings with these, to give you the idea whats wrong.

                ### virtual alias mailbox transport
virtual_alias_maps =
    mysql:/etc/postfix/mysql/mysql-users.cf,
    hash:/etc/postfix/virtual-kopano.map, 
virtual_mailbox_maps = mysql:/etc/postfix/mysql/mysql-users.cf
virtual_mailbox_domains = mysql:/etc/postfix/mysql/mysql-domains.cf
virtual_transport = lmtp:127.0.0.1:2003

                And you want to see this when you check postfix.

                sudo systemctl status postfix
● postfix.service - Postfix Mail Transport Agent
   Loaded: loaded (/lib/systemd/system/postfix.service; enabled; vendor preset: enabled)
  Drop-In: /etc/systemd/system/postfix.service.d
           └─override.conf
   Active: active (exited) since Fri 2019-11-22 11:21:30 CET; 3 weeks 3 days ago
 Main PID: 1183 (code=exited, status=0/SUCCESS)
    Tasks: 0 (limit: 4915)
   Memory: 0B
   CGroup: /system.slice/postfix.service
                1 Reply Last reply Reply Quote 0
                • Miyamoto72
                  Miyamoto72 @Guest last edited by

                  @WalterHof said in Spooler unable to connect to SMTP:

                  Disable the firewall and test.

                  There’s no firewall enabled. Except for docker rules iptables are empty AFAIUI

                  1 Reply Last reply Reply Quote 0
                  • Miyamoto72
                    Miyamoto72 last edited by Miyamoto72

                    master.cf:

                    #
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master" or
# on-line: http://www.postfix.org/master.5.html).
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (no)    (never) (100)
# ==========================================================================
smtp      inet  n       -       y       -       -       smtpd
#smtp      inet  n       -       y       -       1       postscreen
#smtpd     pass  -       -       y       -       -       smtpd
#dnsblog   unix  -       -       y       -       0       dnsblog
#tlsproxy  unix  -       -       y       -       0       tlsproxy
submission inet n       -       y       -       -       smtpd
  -o syslog_name=postfix/submission
  -o smtpd_tls_security_level=encrypt
  -o smtpd_sasl_auth_enable=yes
  -o smtpd_tls_auth_only=yes
  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
  -o smtpd_recipient_restrictions=
  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
  -o milter_macro_daemon_name=ORIGINATING
smtps     inet  n       -       y       -       -       smtpd
  -o syslog_name=postfix/smtps
  -o smtpd_tls_wrappermode=yes
  -o smtpd_sasl_auth_enable=yes
#  -o smtpd_reject_unlisted_recipient=no
#  -o smtpd_client_restrictions=$mua_client_restrictions
#  -o smtpd_helo_restrictions=$mua_helo_restrictions
#  -o smtpd_sender_restrictions=$mua_sender_restrictions
#  -o smtpd_recipient_restrictions=
#  -o smtpd_relay_restrictions=permit_sasl_authenticated,reject
#  -o milter_macro_daemon_name=ORIGINATING
#628       inet  n       -       y       -       -       qmqpd
pickup    unix  n       -       y       60      1       pickup
cleanup   unix  n       -       y       -       0       cleanup
qmgr      unix  n       -       n       300     1       qmgr
#qmgr     unix  n       -       n       300     1       oqmgr
tlsmgr    unix  -       -       y       1000?   1       tlsmgr
rewrite   unix  -       -       y       -       -       trivial-rewrite
bounce    unix  -       -       y       -       0       bounce
defer     unix  -       -       y       -       0       bounce
trace     unix  -       -       y       -       0       bounce
verify    unix  -       -       y       -       1       verify
flush     unix  n       -       y       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       y       -       -       smtp
relay     unix  -       -       y       -       -       smtp
        -o syslog_name=postfix/$service_name
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       y       -       -       showq
error     unix  -       -       y       -       -       error
retry     unix  -       -       y       -       -       error
discard   unix  -       -       y       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       y       -       -       lmtp
anvil     unix  -       -       y       -       1       anvil
scache    unix  -       -       y       -       1       scache
postlog   unix-dgram n  -       n       -       1       postlogd
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# ====================================================================
#
# Recent Cyrus versions can use the existing "lmtp" master.cf entry.
#
# Specify in cyrus.conf:
#   lmtp    cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4
#
# Specify in main.cf one or more of the following:
#  mailbox_transport = lmtp:inet:localhost
#  virtual_transport = lmtp:inet:localhost
#
# ====================================================================
#
# Cyrus 2.1.5 (Amos Gouaux)
# Also specify in main.cf: cyrus_destination_recipient_limit=1
#
#cyrus     unix  -       n       n       -       -       pipe
#  user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user}
#
# ====================================================================
# Old example of delivery via Cyrus.
#
#old-cyrus unix  -       n       n       -       -       pipe
#  flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user}
#
# ====================================================================
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix	-	n	n	-	2	pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

                    main.cf:

                    # See /usr/share/postfix/main.cf.dist for a commented, more complete version


# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname

smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

readme_directory = no

# See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
# fresh installs.
compatibility_level = 2



# TLS parameters
smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
smtpd_use_tls=yes
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
smtp_tls_security_level = verify
smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt
smtpd_tls_security_level = may
smtpd_tls_auth_only = yes
smtpd_tls_mandatory_protocols = !SSLv2,!SSLv3,!TLSv1,!TLSv1.1
smtpd_tls_protocols=!SSLv2,!SSLv3,!TLSv1,!TLSv1.1
smtpd_tls_mandatory_ciphers = medium
tls_medium_cipherlist = AES128+EECDH:AES128+EDH

# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.

smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination
myhostname = mail.fritz.box
alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = mail.example.com, $myhostname, mail.fritz.box, localhost.fritz.box, localhost

# relay mails via hosted.mailcow.de
relayhost = [hosted.mailcow.de]:587
smtp_sasl_auth_enable = yes
smtp_sasl_password_maps = hash:/etc/postfix/relay
smtp_sasl_security_options = noanonymous

mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
mailbox_size_limit = 0
recipient_delimiter = +
inet_interfaces = all
inet_protocols = all

### RSpamD
#
# include rspamd via milter
smtpd_milters = unix:/var/lib/rspamd/milter.sock
# or for TCP socket
#smtpd_milters = inet:localhost:11332

# rspamd: skip mail without checks if something goes wrong
milter_default_action = accept

#Kopano Custom
virtual_alias_maps = hash:/etc/postfix/aliases 			# Aliase/Weiterleitungen für Postfächer
virtual_mailbox_maps = mysql:/etc/postfix/mysql-users.cf 	# Auslesen vorhandener Postfächer
virtual_transport = lmtp:127.0.0.1:2003 			# Weiterleiten der Mail an Dagent für die Zustellung an das Postfach
virtual_mailbox_domains = example.org 				# Berechtigte Empfangs-Domains

smtpd_recipient_restrictions = permit_mynetworks,reject_non_fqdn_recipient,reject_non_fqdn_hostname,reject_invalid_hostname,reject_non_fqdn_recipient,reject_non_fqdn_sender,reject_unauth_pipelining,reject_unverified_recipient

                    As far as I can see the kopano map you mentioned in your post is not in main.cf - but it doesn’t exist at all either. And virtual_mailbox_domains is given directly, not via a hashed table.

                    I know, main.cf is to be optimized in regards of crypto. But first I have to get stuff up and running.

                    For those who speak master.cf and main.cf fluently - any obvious error that could be fixed easily?

                    1 Reply Last reply Reply Quote 0
                    • thctlo
                      thctlo last edited by

                      alias_maps = hash:/etc/aliases and virtual_alias_maps = hash:/etc/postfix/aliases

                      The format (content) of these to “alias” files are different, thats all.
                      I’m betting you copied the alias file, only the format in alias is diffent …
                      per example, from : http://www.postfix.org/VIRTUAL_README.html

                      /etc/postfix/virtual:
    listname-request@example.com listname-request
    listname@example.com         listname
    owner-listname@example.com   owner-listname

/etc/aliases:
    listname: "|/some/where/majordomo/wrapper ..."
    owner-listname: ...
    listname-request: ...

                      And i also recommend to rename the file to virtual-kopano

                      1 Reply Last reply Reply Quote 0
                      • Miyamoto72
                        Miyamoto72 last edited by

                        I’m sorry, you lost your bet ;-) - /etc/postfix/aliases actually is an empty file (that I postmapped, of course)

                        But thanks for clearing up the different formats and the suggestion to rename /etc/postfix/aliases to a kopano-related name.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post