Navigation

    Kopano
    • Register
    • Login
    • Search
    • Categories
    • Get Official Kopano Support
    • Recent
    Statement regarding the closure of the Kopano community forum and the end of the community edition

    Concept configuration of Postfix with Smarthosts

    General Discussion
    5
    39
    8232
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • hispeed
      hispeed last edited by

      Hi, does anyone else can help? I tried different things out. But I don’t know houw should I move forward. I could search a tutorial which explains fetchmail but there are the config files different.

      fbartels 1 Reply Last reply Reply Quote 0
      • fbartels
        fbartels Kopano @hispeed last edited by

        @hispeed said in Concept configuration of Postfix with Smarthosts:

        Hi, does anyone else can help? I tried different things out. But I don’t know houw should I move forward. I could search a tutorial which explains fetchmail but there are the config files different.

        you just have to replace zarafa-dagent with kopano-dagent

        Regards Felix

        Resources:
        https://kopano.com/blog/how-to-get-kopano/
        https://documentation.kopano.io/
        https://kb.kopano.io/

        Support overview:
        https://kopano.com/support/

        1 Reply Last reply Reply Quote 0
        • hispeed
          hispeed last edited by

          Hi Felix (Master-of-support ;D),

          That was one of the changes I already tried. Unfortunately no luck until now.
          Where is dagent.log ? Wheren can I activate the log?

          I have the old zarafa-fetchmail config in front of me.
          It looks very close to this old config but I probably need that log to see what’s wrong.

          “zarafa-fetchmail add zarafausername webXXXX XXXXXXXX webXXX.login-12.hoststar.ch imap 993 ssl”

          fbartels 1 Reply Last reply Reply Quote 0
          • fbartels
            fbartels Kopano @hispeed last edited by

            @hispeed said in Concept configuration of Postfix with Smarthosts:

            That was one of the changes I already tried.

            Then you have to do a better job in describing what you already have tried, how your configuration looks at the moment and what errors you see/get?

            @hispeed said in Concept configuration of Postfix with Smarthosts:

            Where is dagent.log ? Wheren can I activate the log?

            On modern system everything is logged to through systemd to journald. But if you prefer this you can still configure a logfile in the dagent.cfg.

            @hispeed said in Concept configuration of Postfix with Smarthosts:

            “zarafa-fetchmail add zarafausername webXXXX XXXXXXXX webXXX.login-12.hoststar.ch imap 993 ssl”

            This does not look like a fetchmail configuration. imho it should look something like this: (this also makes use of the local mta to deliver mails to dagent, this is something i prefer over directly going to dagent)

            poll pop.gmx.net bad-header accept proto pop3 user something@gmx.net pass my-password-at-gmx is local-email here nokeep fetchall ssl

            Regards Felix

            Resources:
            https://kopano.com/blog/how-to-get-kopano/
            https://documentation.kopano.io/
            https://kb.kopano.io/

            Support overview:
            https://kopano.com/support/

            1 Reply Last reply Reply Quote 0
            • hispeed
              hispeed last edited by

              In systemd i recieve:

              Mai 22 20:45:42 svgwma-kopa-02 kopano-server[2089]: Starting kopano-server version 8.6.80 (pid 2089)
              Mai 22 20:51:01 svgwma-kopa-02 su[2135]: Successful su for fetchmail by root
              Mai 22 20:51:01 svgwma-kopa-02 su[2135]: + /dev/pts/0 root:fetchmail
              Mai 22 20:51:01 svgwma-kopa-02 su[2135]: pam_unix(su:session): session opened for user fetchmail by kopano(uid=0)
              Mai 22 20:51:01 svgwma-kopa-02 su[2135]: pam_systemd(su:session): Cannot create session: Already running in a session
              Mai 22 20:51:06 svgwma-kopa-02 su[2135]: pam_unix(su:session): session closed for user fetchmail
              

              I got now the following error when I use your line concerning fetchmail:

              fetchmail: SMTP error: 550 5.1.1 <hispeed@localhost>: Recipient address rejected: User unknown in local recipient table
              fetchmail: mail from MAILER-DAEMON@svgwma-kopa-02 bounced to XXXX@email.XXXXX.com
              reading message webXXXX@webXXXX.login-XXXX.hoststar.ch:1 of 3 (1279 header octets) (180320 body octets) flushed
              fetchmail: SMTP error: 550 5.1.1 <hispeed@localhost>: Recipient address rejected: User unknown in local recipient table
              fetchmail: mail from MAILER-DAEMON@svgwma-kopa-02 bounced to XXXXX@email.XXXXXX.com
              reading message webXXXX@webXXX.login-XXX.hoststar.ch:2 of 3 (1281 header octets) (180320 body octets) flushed
              fetchmail: SMTP error: 550 5.1.1 <hispeed@localhost>: Recipient address rejected: User unknown in local recipient table
              fetchmail: mail from MAILER-DAEMON@svgwma-kopa-02 bounced to XXXX@email.XXXXcom
              reading message webXXX@webXXXX.ogin-XXX.hoststar.ch:3 of 3 (1268 header octets) (180258 body octets) flushed
              

              The mails were just test mail so i don’t care. You wrote: “Local-Email here” What you mean? I have created a user which is called hispeed in Kopano. Do you mean this user or this users e-mail <- What would be e-mail of a local Kopano user?

              fbartels 1 Reply Last reply Reply Quote 0
              • fbartels
                fbartels Kopano @hispeed last edited by

                @hispeed said in Concept configuration of Postfix with Smarthosts:

                You wrote: “Local-Email here” What you mean? I have created a user which is called hispeed in Kopano. Do you mean this user or this users e-mail <- What would be e-mail of a local Kopano user?

                Yes the mail you’ve given in your fetchmail configuration is not recognized by your postfix and therefore bounces.
                I really to mean an email address, else postfix won’t be able to deliver.
                The email of a Kopano user is whatever you specified as an email when you created the user.

                Regards Felix

                Resources:
                https://kopano.com/blog/how-to-get-kopano/
                https://documentation.kopano.io/
                https://kb.kopano.io/

                Support overview:
                https://kopano.com/support/

                1 Reply Last reply Reply Quote 0
                • hispeed
                  hispeed last edited by hispeed

                  Now it says it’s flushed thru fetchmail but because postfix is not yet configured I don’t get into Kopano.

                  This is my postfix config file running the system on Synology and Zarafa4H. Can I use that? I have marked with ** two lines. There are the files which Zarafa uses for connecting the different accounts. I probably have to change that to Kopano somehow?

                  reject_unknown_helo_hostname
                  smtpd_client_restrictions = permit_mynetworks
                  smtpd_recipient_restrictions = permit_mynetworks reject_invalid_hostname reject_unauth_destination reject_unknown_recipient_domain
                  delay_warning_time = 4h
                  unknown_local_recipient_reject_code = 450
                  maximal_queue_lifetime = 7d
                  minimal_backoff_time = 1000s
                  maximal_backoff_time = 8000s
                  smtpd_recipient_limit = 16
                  smtpd_soft_error_limit = 3
                  smtpd_hard_error_limit = 12
                  
                  # relayhosting from provider when running dynamic IP; now we need sasl_auth
                  #relayhost = smtp.example.com
                  smtp_sasl_auth_enable = yes
                  **smtp_sasl_password_maps = hash:/etc/zarafa/postfix/sasl_passwd**
                  **sender_dependent_relayhost_maps = hash:/etc/zarafa/postfix/sender_relay**
                  smtp_sasl_security_options = noanonymous
                  smtp_sender_dependent_authentication = yes
                  smtp_use_tls = yes
                  smtp_tls_enforce_peername = no
                  smtpd_tls_security_level = may
                  
                  1 Reply Last reply Reply Quote 0
                  • fbartels
                    fbartels Kopano last edited by

                    The above Postfix configuration does not look complete. I’d rather recommend to use the distribution default and then add one of the examples from the documentation. these can be found at https://kb.kopano.io/display/WIKI/Postfix and https://documentation.kopano.io/kopanocore_administrator_manual/configure_kc_components.html#kc-postfix-integration

                    Regards Felix

                    Resources:
                    https://kopano.com/blog/how-to-get-kopano/
                    https://documentation.kopano.io/
                    https://kb.kopano.io/

                    Support overview:
                    https://kopano.com/support/

                    1 Reply Last reply Reply Quote 0
                    • hispeed
                      hispeed last edited by

                      It could be that this is not the whole configuration. I really don’t get it. One of the reason I want to go away from Synology because I really don’t know how that works at the moment and I hope I understand it more if I do it on a own system.

                      At the moment my config I have on pastebin: https://pastebin.com/rzmybzd2
                      Since I have changed the postfix config I recieve that error:
                      Something is now wrong: fetchmail: SMTP error: 451 4.3.0 XXXX@XXXXX.ch: Temporary lookup failure -> reading message webXXXX@webXXXXX.login-12.hoststar.ch:1 of 1 (5926 header octets) not flushed |

                      fbartels 1 Reply Last reply Reply Quote 0
                      • fbartels
                        fbartels Kopano @hispeed last edited by

                        @hispeed said in Concept configuration of Postfix with Smarthosts:

                        Since I have changed the postfix config I recieve that error:

                        so you combined your postfix configuration with the above from synology and now get these errors? Debugging postfix problems is always easier with the full error message from the mail.log and the main.cf (or the output of postfonf -n )

                        Regards Felix

                        Resources:
                        https://kopano.com/blog/how-to-get-kopano/
                        https://documentation.kopano.io/
                        https://kb.kopano.io/

                        Support overview:
                        https://kopano.com/support/

                        1 Reply Last reply Reply Quote 0
                        • hispeed
                          hispeed last edited by hispeed

                          Yes that’s right I combined that but I’m not sure if this is the actual config from the Synology which is running. I have the Docker setup from Zarafa4H. Do you know where the config is which is actually running for the Docker setup?

                          Mail.log:

                          May 25 15:52:19 svgwma-kopa-02 postfix/postfix-script[18371]: starting the Postfix mail system
                          May 25 15:52:19 svgwma-kopa-02 postfix/master[18373]: daemon started -- version 3.3.0, configuration /etc/postfix
                          May 25 15:52:24 svgwma-kopa-02 postfix/smtpd[18415]: connect from localhost6.localdomain6[::1]
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: error: open database /etc/kopano/postfix/sender_relay.db: No such file or directory
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay is unavailable. open database /etc/kopano/postfix/s$
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay lookup error for ""<>""
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: sender_dependent_relayhost_maps lookup failure
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay is unavailable. open database /etc/kopano/postfix/s$
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay lookup error for "XXXXX@hotmail.com"
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: sender_dependent_relayhost_maps lookup failure
                          May 25 15:52:24 svgwma-kopa-02 postfix/smtpd[18415]: NOQUEUE: reject: RCPT from localhost6.localdomain6[::1]: 451 4.3.0 <XXXX@XXXXXX.ch>: Temporary look$
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay is unavailable. open database /etc/kopano/postfix/s$
                          May 25 15:52:24 svgwma-kopa-02 postfix/trivial-rewrite[18418]: warning: hash:/etc/kopano/postfix/sender_relay lookup error for ""<>""
                          
                          1 Reply Last reply Reply Quote 0
                          • hispeed
                            hispeed last edited by hispeed

                            Ok I found the Synology Zarafa4h Docker main.config. Now when I send an e-mail to the adress I can fetch it via Fetchmail and it’s getting flushed. But I don’t recieve it in Kopano ^^. Config should be fine I have corrected it and I don’t recieve any errors right now.
                            This is the mail.log I see now after recieving with fetchmail:

                            May 26 12:46:47 svgwma-kopa-02 postfix/smtpd[23055]: connect from localhost6.localdomain6[::1]
                            May 26 12:46:47 svgwma-kopa-02 postfix/smtpd[23055]: 5E115320DFE: client=localhost6.localdomain6[::1]
                            May 26 12:46:47 svgwma-kopa-02 postfix/cleanup[23058]: 5E115320DFE: message-id=<AM4PR08MB118748749C61D00DED07E089FB680@AM4PR08MB1187.eurprd08.prod.outlook.com>
                            May 26 12:46:47 svgwma-kopa-02 postfix/qmgr[23017]: 5E115320DFE: from=<MyEMailaddress@hotmail.com>, size=7069, nrcpt=1 (queue active)
                            May 26 12:46:47 svgwma-kopa-02 postfix/smtpd[23055]: disconnect from localhost6.localdomain6[::1] ehlo=1 mail=1 rcpt=1 data=1 quit=1 commands=5
                            May 26 12:46:50 svgwma-kopa-02 postfix/smtp[23059]: 5E115320DFE: to=<Emailkopanouser@domain.ch>, relay=mail.XXXX.ch[213.239.XXX.XXX]:25, delay=3, delays=0.$
                            May 26 12:46:50 svgwma-kopa-02 postfix/qmgr[23017]: 5E115320DFE: removed
                            

                            Why is the last line:
                            May 26 12:46:50 svgwma-kopa-02 postfix/qmgr[23017]: 5E115320DFE: removed <— Removed! My message???

                            1 Reply Last reply Reply Quote 0
                            • Gerald
                              Gerald last edited by

                              The mail is removed because it was delivered to mail.XXXX.ch[213.239.XX.XXX]. If this is not your Kopano server, something is wrong here. Perhaps postfix does not think it is responsible for this domain. Also, why is postfix involved here? If you use fetchmail to get mail and send that to kopano-dagent, postfix should not be involved ?!?

                              1 Reply Last reply Reply Quote 0
                              • hispeed
                                hispeed last edited by hispeed

                                I really don’t know why postfix is now involved for recieving mails. Maybe this is a question for Felix?

                                Here is my actual config from postfix:

                                # See /usr/share/postfix/main.cf.dist for a commented, more complete version
                                
                                
                                # Debian specific:  Specifying a file name will cause the first
                                # line of that file to be used as the name.  The Debian default
                                # is /etc/mailname.
                                #myorigin = /etc/mailname
                                
                                smtpd_banner = $myhostname ESMTP
                                biff = no
                                
                                # appending .domain is the MUA's job.
                                append_dot_mydomain = no
                                
                                # Uncomment the next line to generate "delayed mail" warnings
                                #delay_warning_time = 4h
                                
                                readme_directory = no
                                
                                # See http://www.postfix.org/COMPATIBILITY_README.html -- default to 2 on
                                # fresh installs.
                                compatibility_level = 2
                                
                                # TLS parameters
                                smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
                                smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
                                smtpd_use_tls=yes
                                smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
                                smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache
                                
                                # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
                                # information on enabling SSL in the smtp client.
                                
                                # smtpd_relay_restrictions = permit_mynetworks defer_unauth_destination
                                myhostname = svgwma-kopa-02.mysubdomain.topleveldomain.com
                                mydomain = mydomain.me
                                myorigin = $mydomain
                                alias_maps = hash:/etc/aliases
                                alias_database = hash:/etc/aliases
                                virtual_transport = lmtp:[localhost]:2003
                                # virtual_mailbox_domains = /etc/kopano/postfix/vdomains
                                # virtual_alias_maps = hash:/etc/kopano/postfix/valiases
                                mydestination = $myhostname, svgwma-kopa-02, localhost.localdomain, localhost
                                # relayhost =
                                mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
                                smtp_host_lookup = dns, native
                                mailbox_size_limit = 0
                                recipient_delimiter = +
                                inet_interfaces = all
                                inet_protocols = all
                                message_size_limit = 52428800
                                
                                #Hinzugefuegt am 24.05.2018 von alter Zarafa Konfiguration
                                
                                smtpd_client_restrictions = permit_mynetworks
                                smtpd_recipient_restrictions = permit_mynetworks reject_invalid_hostname reject_unauth_destination reject_unknown_recipient_domain
                                delay_warning_time = 4h
                                smtpd_helo_required = yes
                                #unknown_local_recipient_reject_code = 450
                                maximal_queue_lifetime = 7d
                                minimal_backoff_time = 1000s
                                maximal_backoff_time = 8000s
                                smtpd_recipient_limit = 16
                                smtpd_soft_error_limit = 3
                                smtpd_hard_error_limit = 12
                                smtpd_sender_restrictions = reject_unknown_address
                                #relayhosting from provider when running dynamic IP; now we need sasl_auth
                                # relayhost = smtp.example.com
                                smtp_sasl_auth_enable = yes
                                smtp_sasl_password_maps = hash:/etc/kopano/postfix/sasl_passwd
                                sender_dependent_relayhost_maps = hash:/etc/kopano/postfix/sender_relay
                                smtp_use_tls = yes
                                smtp_sasl_security_options = noanonymous
                                smtp_sender_dependent_authentication = yes
                                smtp_tls_enforce_peername = no
                                smtpd_tls_security_level = may
                                smtp_helo_timeout = 120s
                                

                                Here is mail fetchmail config:

                                #.fetchmailrc
                                set postmaster hispeed@mydomain.ch
                                # set no bouncemail
                                set no softbounce
                                # accounts
                                poll server.login-12.hoststar.ch bad-header accept proto imap user loginuser pass password is hispeed@mydomain.ch nokeep fetchall ssl
                                

                                Right now Fetchmail is showing me that the message is flushed.
                                I don’t recieve any mails in Kopano. In mail.log I recieve this:

                                May 27 19:52:41 svgwma-kopa-02 postfix/smtpd[30766]: connect from localhost6.localdomain6[::1]
                                May 27 19:52:41 svgwma-kopa-02 postfix/smtpd[30766]: 8617A320E75: client=localhost6.localdomain6[::1]
                                May 27 19:52:41 svgwma-kopa-02 postfix/cleanup[30769]: 8617A320E75: message-id=<DB5PR08MB119103B83CE312DEB6C608DEFB6F0@DB5PR08MB1191.eurprd08.prod.outlook.com>
                                May 27 19:52:41 svgwma-kopa-02 postfix/qmgr[30459]: 8617A320E75: from=<myemailtestsender@hotmail.com>, size=7071, nrcpt=1 (queue active)
                                May 27 19:52:41 svgwma-kopa-02 postfix/smtpd[30766]: 9E8DF320E76: client=localhost6.localdomain6[::1]
                                May 27 19:52:41 svgwma-kopa-02 postfix/cleanup[30769]: 9E8DF320E76: message-id=<DB5PR08MB11917FBDB3ECAEC234C9F1F3FB6F0@DB5PR08MB1191.eurprd08.prod.outlook.com>
                                May 27 19:52:41 svgwma-kopa-02 postfix/qmgr[30459]: 9E8DF320E76: from=<myemailtestsender@hotmail.com>, size=7065, nrcpt=1 (queue active)
                                May 27 19:52:41 svgwma-kopa-02 postfix/smtpd[30766]: disconnect from localhost6.localdomain6[::1] ehlo=1 mail=2 rcpt=2 data=2 quit=1 commands=8
                                May 27 19:52:45 svgwma-kopa-02 postfix/smtp[30770]: 8617A320E75: to=<mykopanolocaluser@mytopleveldomain.ch>, relay=mail.externalmailserver.ch[XXX.XXX.213.233]:25, delay=3.6, delays=$
                                May 27 19:52:45 svgwma-kopa-02 postfix/qmgr[30459]: 8617A320E75: removed
                                May 27 19:52:45 svgwma-kopa-02 postfix/smtp[30771]: 9E8DF320E76: to=<mykopanolocaluser@mytopleveldomain.ch>, relay=mail.externalmailserver.ch[XX.2XXX.213.233]:25, delay=3.6, delays=$
                                May 27 19:52:45 svgwma-kopa-02 postfix/qmgr[30459]: 9E8DF320E76: removed
                                

                                Thanks for any help.

                                1 Reply Last reply Reply Quote 0
                                • hispeed
                                  hispeed last edited by hispeed

                                  I have now the configuration in Fetchmail from Gerald but unfortunately i recieve this:

                                  1 message for USERNAME at webXXX.login-12.hoststar.ch (6689 octets).
                                  fetchmail: MDA returned nonzero status 75
                                  reading message webXXXX@webXXX.login-12.hoststar.ch:1 of 1 (6689 octets) not flushed
                                  

                                  My questions do I need perl for Fetchmail? Something is probably wrong in the config but which config?
                                  I don’t get more output from Fetchmail.

                                  Gerald 1 Reply Last reply Reply Quote 0
                                  • martimcfly
                                    martimcfly @hispeed last edited by martimcfly

                                    @hispeed Hej hispeed! Maybe this is something for you?

                                    I created a distribution for ARMv7 (RaspberryPi, Odroid) serving all your wishes. Packages for x64 are going to be build after testing.

                                    It brings all configuration files and a customized Postfixadmin (managing Kopano and Postfix simultaneously) you can create a standalone mailserver or one which is sending with smarthost (User- or Domainwide) at the same time. Fetchmail is working, too.

                                    The installscripts create the ready and running server. All together your done in about 15 minutes.

                                    Introduction (Zarafa based)
                                    https://pietma.com/zarafa-packages-for-arch-linux-arm/
                                    https://pietma.com/zarafa-and-postfix-management/

                                    KOPANO BUILD
                                    https://pietma.com/run-and-access-zarafa/#comment-1973

                                    Current image with Kopano 8.6.1
                                    https://repository.pietma.com/nexus/content/sites/archlinux/os/prepared-kopano/

                                    Marti

                                    1 Reply Last reply Reply Quote 0
                                    • hispeed
                                      hispeed last edited by

                                      Thanks for your post martimcfly. Actually I have a Odroid-C1 but I use it for something different. So I will need the X64 image. But I hope I can get it running on Ubuntu but if don’t get it work I will try your image as soon as it’s available for my platform based on esxi 6.5.

                                      1 Reply Last reply Reply Quote 0
                                      • Gerald
                                        Gerald @hispeed last edited by Gerald

                                        @hispeed said in Concept configuration of Postfix with Smarthosts:

                                        I have now the configuration in Fetchmail from Gerald but unfortunately i recieve this:

                                        1 message for USERNAME at webXXX.login-12.hoststar.ch (6689 octets).
                                        fetchmail: MDA returned nonzero status 75
                                        reading message webXXXX@webXXX.login-12.hoststar.ch:1 of 1 (6689 octets) not flushed
                                        

                                        My questions do I need perl for Fetchmail? Something is probably wrong in the config but which config?
                                        I don’t get more output from Fetchmail.

                                        If you use the way I’m using fetchmail and have suggested it above, postfix should not be involved since it will fetch the mail and directly deliver it using kopano-dagent. So it should work even if your postfix configuration is not correct (which is probably the case :-)

                                        As fbartels has mentioned, make sure you change zarafa-dagent to kopano-dagent. My example was copy&pasted from my installation logs and it was still called zarafa at the time.

                                        So assuming you are now using

                                        poll pop.srv.de proto pop3 user "mylogin" pass "mypass" options ssl smtpaddress localhost forcecr mda "/usr/bin/kopano-dagent -s the-local-kopano-user-id
                                        

                                        as your configuration, your problem is most likely with kopano-dagent since this is the MDA (mail delivery agent) and your fetchmail complains about an MDA problem. To my knowledge fetchmail does not need perl, and the error message does not in any way suggest that perl would be a problem. I suggest you first check if the executable /usr/bin/kopano-dagent specified is correct (could be in another path on other distros? I’m using ubuntu 16.04) and if this is correct you need to check the logs of kopano-dagent why it fails.

                                        To do so, on modern systems with systemd init and current kopano configuration files you need to check the systemd log (journalctl -u kopano-dagent -f -n 20 for example). On older crappy obsolete legacy systems without systemd+journal check /var/log/kopano/ for a dagent log file. You might need to turn up the logging level if not enough can be seen in the log why it fails. This can of course be done in /etc/kopano/dagent.cfg

                                        If you use fetchmail the way fbartels has suggested he prefers, this is of course also perfectly fine. But then your postfix server must know for which emails he is directly responsible. Your postfix log above looked like postfix sent the email on to the internet because it did not think it is responsible to locally handle it. There are many ways to configure postfix, I’m using the virtual_ directives to tell postfix for what it is responsible. But there are other ways. If you want to go this route, the options “virtual_mailbox_domains”, “virtual_mailbox_maps”, “virtual_alias_maps” and “virtual_transport” are the most impotant. You need to really learn how to configure postfix though. If you just want to fetch some mails using POP or IMAP and Postfix will alway only be used to send mail to external recipients, using fetchmail + kopano-dagent will be much easier for you.

                                        1 Reply Last reply Reply Quote 0
                                        • thctlo
                                          thctlo last edited by

                                          @martimcfly are these scripts anywhere on github? and GPL?
                                          Then im not inventing the wheel again, this is a thing i want in debian also.
                                          The source code page says 404 to me :-(

                                          martimcfly 1 Reply Last reply Reply Quote 0
                                          • martimcfly
                                            martimcfly @thctlo last edited by martimcfly

                                            Sorry for the 404. My Gitlab (SCM) wasn’t updated for a while and I’ve made it private for security reasons. Temporaly of course.

                                            The bash-scripts are packed in here…

                                            /usr/share/doc/kopano/pietma
                                            https://repository.pietma.com/nexus/service/local/repositories/archlinux/content/armv7h/pietma-kopano/kopano-core-8.6.1-1-armv7h.pkg.tar.xz

                                            /usr/share/doc/kopano-postfixadmin/pietma/
                                            /usr/share/doc/kopano-postfixadmin/example-config/
                                            https://repository.pietma.com/nexus/service/local/repositories/archlinux/content/armv7h/pietma-kopano/kopano-postfixadmin-0.45.3-4-any.pkg.tar.xz

                                            Please be aware of the fact, that these script have dependencies and asume paths which are only guaranteed with that packages on Archlinux.

                                            But you can get a good idea how all this have to be setup to be working.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post